ikan Beholder MS1 3-Axis Motorized Gimbal Stabilizer Sale

ikan Beholder MS1 3-Axis Motorized Gimbal Stabilizer

The Beholder MS1 3-Axis Motorized Gimbal Stabilizer brings the simplicity and flexibility of a handheld smartphone gimbal stabilizer to the world of mirrorless cameras. It features a 3-axis, motorized gimbal designed to keep your camera level and isolated from hand shake while allowing you to create smooth, organic moving camera shots. The MS1 features two operational modes: a following mode that smoothes your camera movements and a lock mode that will hold your camera in its position as you move. The MS1 features a thumb button/joystick which you use to select modes. You can also use the joystick to pan and tilt your camera on the gimbal.

More details

42046
New product

AED 2,620

AED 2,640 per 1
25 Items

- +

Add to compare

 
More info

The Beholder MS1 3-Axis Motorized Gimbal Stabilizer brings the simplicity and flexibility of a handheld smartphone gimbal stabilizer to the world of mirrorless cameras. It features a 3-axis, motorized gimbal designed to keep your camera level and isolated from hand shake while allowing you to create smooth, organic moving camera shots. The MS1 features two operational modes: a following mode that smoothes your camera movements and a lock mode that will hold your camera in its position as you move. The MS1 features a thumb button/joystick which you use to select modes. You can also use the joystick to pan and tilt your camera on the gimbal.

The gimbal features a baseplate and sliding camera plate that allows you to adjust the balance of your camera on the sled, both left-to-right and forward-to-back. An included offset balance plate expands the range of cameras that you can use with the Beholder.

Terms
The terms pitch, roll, and yaw are often used to describe its axes of stabilization with this type of stabilizer. For those camera operators that are not familiar with these terms, if your camera was mounted on a tripod, the terms would translate as follows:
  • Yaw = Pan
  • Pitch = Tilt
  • Roll=Level (Horizon)

 

 

Modes
The MS1 supports two modes: Follow Mode and Lock Mode.
Follow Mode stabilizes the camera and allows it to follow your movements as you pan and tilt.
Lock Mode stabilizes the camera and holds in position even if you pan, tilt, or try to Dutch (off level the camera), until you reach the physical limit of the motor.
Thumb Button/Joystick
The thumb button/joystick incorporated into the handle allows you to select the mode. It also allows you to pan or tilt your camera on the gimbal.
Sliding Balance Plate
Once you have balanced the camera side-to-side, the sliding balance plate allows you to quickly rebalance your camera front-to-back when changing lenses without having to rebalance the camera side-to-side or remount it on the stabilizer.
Mounting
You can mount a variety of cameras to the stabilizer. The Offset plate has 5 additional 1/4"-20 positions to balance many different weighted cameras and lenses.
Power
The handle features a USB port that can be used to power or charge your camera or other USB powered device.
Battery Life / Charging
The batteries fit inside a removable cradle in the handle, and must be removed for charging. Charging takes between 4 to 5 hours, and can run the stabilizer for 2 to 3 hours. You must use a 2 A charger to properly charge the batteries. A built-in LED indicates battery condition and charging status.
Compatibility
The MS1 supports the following cameras:
  • Sony A7S
  • Sony A7II
  • GH4, GH3, GH7
  • A6000
  • BMPCC
  • NX500
  • Canon G6
  • RX100 - with included adapter plate
  • NEX series

Write a review

ikan Beholder MS1 3-Axis Motorized Gimbal Stabilizer

The Beholder MS1 3-Axis Motorized Gimbal Stabilizer brings the simplicity and flexibility of a handheld smartphone gimbal stabilizer to the world of mirrorless cameras. It features a 3-axis, motorized gimbal designed to keep your camera level and isolated from hand shake while allowing you to create smooth, organic moving camera shots. The MS1 features two operational modes: a following mode that smoothes your camera movements and a lock mode that will hold your camera in its position as you move. The MS1 features a thumb button/joystick which you use to select modes. You can also use the joystick to pan and tilt your camera on the gimbal.

Write a review

 
Custom tab

This is a custom block edited from admin panel.You can insert any content here.

3 other products in the same category:

Compare 0

No products

To be determined Shipping
AED 0 Total

Check out